Electromechanical Relays

Hasco Component's electromechanical relays range from less than an amp to 80 amps. Hasco's relays are UL and CSA with some TUV ratings. All relays have DC coils and many have an AC coil. They come sealed for wave soldering and washing thereby allowing the relays to be put on any assemble line. There are surface mount low current relays available as well.

DPDT—DIP PC STANDARD OR SENSITIVE 2.0 AMP
BIFURCATED CONTACT RELAY

FEATURES Sensitive available. Fully sealed. File E75887 File LR49291

RATING PERFORMANCE
Specifications				Note
Contact	Contact Arrangement		DPDT, 2 Form C
	Contact Material		Gold-clad, Ag-Pd alloy
	Contact		Max. 100 mOhms	at initial value
	Max. Switching Power		DC 30W AC 50 VA	at resistive load
	Max. Switching Voltage		125VDC 150VAC
	Max. Switching Current		2A 30VDC 0.6 / 125 VAC 2.5A @ 12V
Time	Operate Time	(Type CS)	Approx. 5 msec.
		(Type CAS)	Approx. 5 msec.
	Release Time	(Type CS)	Approx. 3 msec.
		(Type CAS)	Approx. 5 msec.
	Bounce Time (Operating)		Approx. 0.5 to 1 msec.
	Bounce Time (Releasing)		Approx. 02.5 to 3 msec.
Insulation Resistance			100 M Ohms	at 500 VAC, 25°C, 50% relative humidity
Dielectric Strength	1000VAC Between coil and contacts 1000VAC Between open contacts			CAS, CS
FCC Surge Strength	1500V Between coil and contacts Between Adjacent contacts			CS
Vibration Resistance			10g (10 - 55 Hz)
Temperature			-25°C ~ +75°C -25°C ~ +85°C	CAS, CS
Life	Mechanical Life		2 x 107 times
	Electrical Life		2 x 106 times	at 20mV 1KHz 1mA resistive load
Weight			5 g